Idrosan opaca

Sanitising Water-based Painting anti-mould

It is sanitising water-based painting anti-mould for internal use, good look, opaque, transpiring, washable, high cladding power, excellent degree of whiteness, composed of resins in water emulsion, micronized charges, specific admixtures against the moulds and fungus, so it contrasts the micro-organism present on the surfaces and at the same time prevents the growth of them.

Technical data

Category:

Water-based paints and interior decoration

Color

36 dyes from colours chart – more than 170 colourings from Plastimur swatch book. Moreover, with the new tintometer colourization system, it is possible to obtain countless paints.

Packaging

Drums litographed of lt 4 and 13

Storage

12 months at least in its original packaging far from low and high temperatures

Description

CHARACTERISTICS

PREPARATION AND APPLICATION

NEW SURFACES

Substrates have to be fine-finished, cured and dry; apply one coat of fixative ALBURESIN diluted with water in ratio 1:5 up to 1:10, basing on the substrate’s absorption and let it dry 5/6 hours. Apply through brush or roller two or more coats of water-painting diluted with 28-40% of water, with an interval between the coats of 5-6 hours.

OLD SURFACES CONTAMINATED

Apply in uniforming way PREVEN R50 on all the surfaces you want to treat to sterilize, and wait for the product’s efficacy for about 12 hours. Clean removing blackened parts; apply ALBURESIN in ratio 1:5 up to 1:10 and let it dry 5/6 hours; apply the water-painting diluted with 28-40% of water, with an interval between the coats of 5-6 hours.

Technical data