Acrilfinix Plast

Plastic Coating very fine

Acrilfinix Plast

    36 dyes from colours chart – more than 170 colourings from Plastimur swatch book. Moreover, with the new tintometer colourization system, it is possible to obtain countless paints.


    Plastic drums litographed of kg 25 net weight


    12 months at least in its original packaging far from low and high temperatures


It is a coloured plastic thick-layered coating in paste, ready to use, conceived for the finishing, decoration and protection of interior and exterior facades.

It is composed of selected sands, crystalline carbonates, pigments, with excellent light stability, various admixtures suitable for easy application, all bound with acrylic resins in watery emulsion.

It is a product with high resistance to chimical and atmospheric agents, waterproofer, resistant to low and high temperatures, excellent stability and resistance to alkali and UV rays.


Thanks to its final look, it is adapted both for interior and exterior employ, and it is also appliable for new and old buildings, on substrates as: cementitious skim coats, traditional and pre-mixed plasters, fiber-cement pre-fabricated panels, etc. In case of renovations it is suggested to remove any eventual coating before the application.



Substrates conditions and their preparation are at the base of a good result for the coloured coating (not referring to application’s performance quality). Substrates may be in cementitious base; then they may be solid, dry and perfectly cured; No grease traces, dust, humidity rejection, saltpetre, and anything could compromise a good bonding.

In case of restoration, before the application it is recommended to remove eventual synthetic coatings or damaged parts, restoring with cementitious mortar and let cure all the adjustements effectuated before the application. Before the application product, substrates have to be treated, 24/48 hours before and for the entire surface, with adapted fixative ANTEPLAST in acrylic-resins base, through roller or brush to improve the coating’s workability, and obtain a homogeneous absorption of the surfaces.


The product is in paste ready to use, already coloured, to mix accurately before the usage, wtih a drill at a low speed rotations, until you obtain a dough homogeneous.


The application is to be effectuated in two coats on substrates treated perfectly planar, through a first coat smoothing with inox trowel, then apply the second coat, after at least 24 hours, and finishing with plastic trowel in circulating movements to obtain the desired look.